 |
|
|
|
|
| A summary of our main systems: |
|
|
|
|
BC-Brandschutz-Schott S 90
UNO
The system BC-Brandschutz-Schott S 90/UNO is a cable penetration seal, certified by the construction authorities, for cable conduits through fire walls and ceilings inside buildings with a fire resistance period of at least 90 minutes.
 Next
|
|
|
|
|
|
|
BC-Brandschutz-Schott S 90
Kombi
The system BC-Brandschutz-Schott
S 90/Kombi is a mixed cable penetration seal, certified under construction laws, for cable and/or pipe conduits through fire walls and ceilings for interior application and with a fire resistance period of 90 minutes.
The new, extended approval dated 22nd July 2005 allows further installation of inflammable and non-inflammable insulation.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Kissenschott
S 90 (Pillow penetration seal)
Cable penetration seal with special pillows for electrical cable and leads through solid walls and ceilings. The system can be installed as temporary or durable penetration system.
Next
|
|
|
|
|
|
|
Fire protection coating for cable
BC-Brandschutz-fire protection coating for cable, applied to horizontal and vertical laid cable leads. Approved with or without optional top coat.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Kabelvollbandage
(cable bandage system)
With this system the BC-Brandschutz-Kabelvollbandage prevents or delays as a total wrapping around the cable and the cable routes the rise and development of a cable fire.
Cable wrapping systems often are used to encapsulate the fire load as a comparative system to so called I–channels, made of fire proof boards, where these systems cannot be installed due to building circumstances.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Coating BMA
Approved cable coating for horizontal and vertical laid single cable, cable bundles and cable routes, for use interior and outside of buildings.
Next
|
|
|
|
|
|
|
Pipe penetration R 90 for non-inflammable pipes as per appendix 13
Approved, through going penetration system R 90 for non-inflammable pipes of steel, stainless steel, cast iron or copper, using the non-inflammable BC-Brandschutz-Matte 30 as per Approval No. Z-19.15-411.
Next
|
|
|
|
|
|
|
Pipe penetration R 90 for non-inflammable pipes as per appendix 12
Approved penetration seal R 90 for pipes of steel and copper, using several approved mineral fibre slabs and trays as per Approval No. Z-19.15-411.
Next
|
|
|
|
|
|
|
Pipe collars R 90
Penetrations through walls and ceilings for all standard plastic pipes for anchoring on the wall or for grouting into the wall. UNIFOX PLUS is also permitted as pipe collar with sound insulation. For ceiling penetrations, only one collar on the bottom side is necessary.
Next
|
|
|
|
|
|
|
Penetration of inflammable insulation
Fire protective penetration for throughgoing inflammable or non-inflammable pipe insulation (of synthetic rubber, mineral fibre with unknown melting point, Polyurethane or foam glass) on non-inflammable pipes of steel, cast-iron, stainless steel or copper in the fire resistance class R 90 consisting of a mat of the intumescent building material "PYROSTAT-UNI", wrapped around the insulation.
Next
|
|
|
|
|
|
|
Single pipe penetration
Single pipes of inflammable or non-inflammable building materials could be penetrated under special circumstances with intumescent coatings, as per LAR.
Next
|
|
|
|
|
|
|
Single cable penetration
With single cables it is permitted to close the gap around the cable with intumescent coatings, as per LAR.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Schott
S 120
The system BC-Brandschutz-Schott S 120 is a cable penetration seal, certified by the construction authorities, for cable conduits through fire walls and ceilings inside buildings with a fire resistance period of at least 120 minutes.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Schott S 60
The system BC-Brandschutz-Schott S 60 is a cable penetration seal, certified by the construction authorities, for cable conduits through fire walls inside buildings with a fire resistance period of at least 60 minutes.
Next
|
|
|
|
|
|
|
Fire protection systems for wood, white or tinted
Wood and wooden building materials are inflammable. By coating them with BC-Brandschutz-Farbe (paint) you can upgrade these inflammable surfaces from the building material class B2 (normal inflammable) to B1 (hardly inflammable). This system can be used with or without top coat inside of buildings.
Next
|
|
|
|
|
|
|
Fire protection system for wood, transparent
Colourless fire protection coating for wood, consisting of intumescent coating BC-Brandschutz-Woodcoat transparent and the top coat BC-Brandschutz-Woodcoat TOP CF. The surface will be classified after coating into the building material class B1 (hardly inflammable).
Next
|
|
|
|
|
|
|
F 90 Fire resistance–joint bound RP 55
RP 55 is a proofed system for joints breadths up to 55 mm.
Mineral fibre cord for joints, packing into ceilings R 30 - R 120 and into load-bearing and not load-bearing room final massif walls
R 30 - R 120 in accordance with DIN 4102
part 4.
The joint cord is a tested building material in Building Material Class A1, and is suitable for sealing a silicone-free fire protection joint, both for indoor and outdoor use.
For joint widths up to 55 mm.
Next
|
|
|
|
|
|
|
BC-Brandschutz-Ferrocoat 30-90
BC-Brandschutz-Ferrocoat 30-90 is an anviromental-friendly and cost-saving intumescent fire retendant steel coating, waterborne and free from halogenes and fibre for the use inside buildings and in roofed, open halls.
Next
|
|
|
|
Cable penetration seals
